Musikmesse: The Flame MIDI Talking Synth

FLAME MIDI TALKING SYNTHFlame has introduced the Flame MIDI Talking Synth, a small-sized MIDI-controlled sound module based on the analog Speakjet chip, produced by the U.S. company Magnevation.

Originally designed for basic artificially generated speech output in American English tongue, it has been refined and further developed as an 8-bit sound module with speech-like sounds and synthetic robot voices as well as beeps, alarms, noise and retro-style sci-fi sounds.

You can preview the sound of the MIDI Talking Synth below.

Due to the structure of the Speakjet (with its complex sound synthesizer, preset sounds and serial interface), it offers an impressive range of possibilities. It contains 72 speech elements (allophones), 43 sound effects, and 12 DTM touch tones.

The idea for the MIDI Talking Synth was to create sounds, patterns and sequences in the 8-bit style of the 80s or other retro sounds for making music instead of just simulating speech.

Most allophones can be tuned and used tonally. The Flame MIDI Talking Synth contains two Speakjet chips to produce a richer and more complex tonal variety as well as generating a pseudo stereo effect.

Since the Speakjet was not originally laid out for the purpose of making music it is actually not fully controllable via MIDI input, i.e.: once sounds are triggered they cannot be directly stopped by Note Off messages from a MIDI keyboard or a sequencer. Thus a MIDI-controlled audio tremolo has been implemented allowing MIDI control and enabling an easier integration into a MIDI setup.

The MIDI Talking Synth lets you play back preset words in its EXPANDER mode via an external MIDI keyboard or a sequencer. In addition you can use the FLAME MIDI TALKING SYNTH as a stand-alone MIDI controller since all controls and joysticks send MIDI control/change data to the MIDI-OUT connector.

3 thoughts on “Musikmesse: The Flame MIDI Talking Synth

  1. I have this synth. I am a little disappointed with its very low volume at the output, with now way to raise it onboard. It has one output jack that only excepts stereo male. this is a very experimental/boutiqe type of synth. the sounds are great! just don’t plan on being able to replacate something you did yesterday with much ease.

  2. Actually, I am totally wrong about the output level. For some reason I tought I could use headphones on the stereo output jack and still be able to here the synth properly, so please scratch that coment from your memory because the levels are fine.

Leave a Reply to synthhead Cancel reply

Your email address will not be published. Required fields are marked *