John Blacet has added several new options to his line of modular synthesizers recently:

WC2700 Window Comparator

A voltage controlled window comparator with complete control of output setpoint and width.

Use with envelope or LFO type signals to generate delayed gates and triggers. Or use with audio waveforms for many interesting permutations.

Normal, inverted and trigger outputs with green and blue LEDs.

Input normalled to built-in ramp generator for stand alone delayed gate/trigger timing.

Precision, ultra stable Ramp generator has bonus Rate CV, Gate and separate output for use by itself!

A very unusual and useful module!

Available about November 1.

Price: TBA

SB2780 Splitter

A precision, low offset, one to three splitter for CVs or audio. One source to three destinations. Fully buffered.

“A” Channel has an attenuator, “B” Channel has a phase changing attenuator, “C” Channel is “straight through” but buffered.

A very handy utility module!

Available about November 1.

Price: TBA

SB2790 Mixer

A precision, low offset, three to one mixer for CVs or audio. Three sources to one destination. Fully buffered.

“A” Channel has an attenuator, “B” Channel has a phase changing attenuator, “C” Channel is “straight through” but buffered and has a trimpot for setting 50% to 100% level.

A very handy utility module!

Available about November 1.

Price: TBA

MD2600 Scanner

Under manual or voltage control, this module selects from one of three inputs and sends it to the output.

Use for audio or CV selection. Full +/-15V range.

On board trimmers allow selectable amount of overlap between inputs and size of voltage steps for scanning.

MD2650 Sequential Switch

Bidirectional signal routing with full +/-15V range.
3 in — 1 Out
1 In — 3 Out

Use for audio or CV sequencing.

Built in or external clock.