Godlyke has released the Maxon AD999 Pro Analog Delay.
The AD999 Pro uses four custom-made Maxon MC4107D bucket brigade IC’s with 900 milliseconds of available delay time. Delay repeats are then filtered using Maxon’s proprietary RMS level sensor and companding noise reduction circuitry to provide the most pristine, low-noise analog delay tone available.
The street price for the AD999 Pro is $399.99.
With a wider dynamic range than most other delays and a max input level of +12 dB, the AD999 Pro can be used with any input signal and also in amplifier effects loops. The AD999 Pro’s improved low range response yields a bold sound not normally associated with analog delay, creating a delay tone that is simultaneously clear and firm yet retains the characteristic warmth of analog.
The AD999 Pro features a new “Multi-Head” mode that feeds midstream delay signals back into the delay circuit to emulate the sound of multi-head tape delay operation. These feedback loops can be selected in a variety of combinations to create complex multi-tap delay repeats and rhythmic delay effects such as triplet- and sixteenth-note rhythms. The Multi-Head mode creates a striking tape echo simulation, or it can be used to create ambient effects such as large room and concert hall reverberation.
The AD999 Pro features Maxon’s standard DC to DC voltage converter/regulator circuitry that assures consistent performance regardless of AC power fluctuation. The AD999 Pro also ships with the new Maxon AC2009 power supply. The AC2009 provides very consistent high current that is regulated and filtered to provide stable, noise-free power. The AC2009 is auto-sensing, so it can be used anywhere in the world by simply changing out the detachable plug cord on the output side of the PSU.
Topping off the AD999 Pro are Stereo outputs that allow panning of the delay signal to two amps or mixer channels and mechanical true bypass switching on both outputs via a custom 4PDT low-noise switch.
For more information, visit their web site at www.godlyke.com.