Comments on: Turning A Stylophone Into A MIDI controller http://www.synthtopia.com/content/2009/06/26/stylophone-as-midi-controller/ Synthesizer and electronic music news, synth and music software reviews and more! Sun, 22 Nov 2009 06:52:52 -0500 hourly 1 By: hotchk155 http://www.synthtopia.com/content/2009/06/26/stylophone-as-midi-controller/#comment-138704 hotchk155 Tue, 30 Jun 2009 12:58:19 +0000 http://www.synthtopia.com/content/?p=15170#comment-138704 Well I reckon there might be space, or you could make some... Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them (see bottom of page at <a href="http://sites.google.com/site/skriyl/Home/midi-stylophone" target="_blank">http://sites.google.com/site/skriyl/Home/midi-sty...</a> Well I reckon there might be space, or you could make some… Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them (see bottom of page at http://sites.google.com/site/skriyl/Home/midi-sty...

]]> By: hotchk155 http://www.synthtopia.com/content/2009/06/26/stylophone-as-midi-controller/#comment-138703 hotchk155 Tue, 30 Jun 2009 12:57:51 +0000 http://www.synthtopia.com/content/?p=15170#comment-138703 Well I reckon there might be space, or you could make some... Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them (see bottom of page at <a href="http://sites.google.com/site/skriyl/Home/midi-stylophone)" target="_blank">http://sites.google.com/site/skriyl/Home/midi-sty...</a> Well I reckon there might be space, or you could make some… Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them (see bottom of page at http://sites.google.com/site/skriyl/Home/midi-sty...

]]> By: hotchk155 http://www.synthtopia.com/content/2009/06/26/stylophone-as-midi-controller/#comment-138702 hotchk155 Tue, 30 Jun 2009 12:57:12 +0000 http://www.synthtopia.com/content/?p=15170#comment-138702 Well I reckon there might be space, or you could make some... Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them (see bottom of page at <a href="http://sites.google.com/site/skriyl/Home/midi-stylophone" target="_blank"><a href="http://sites.google.com/site/skriyl/Home/midi-sty...</a>)" target="_blank">http://sites.google.com/site/skriyl/Home/midi-sty...</a>)</a> Well I reckon there might be space, or you could make some… Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them (see bottom of page at http://sites.google.com/site/skriyl/Home/midi-sty...)

]]> By: hotchk155 http://www.synthtopia.com/content/2009/06/26/stylophone-as-midi-controller/#comment-138706 hotchk155 Tue, 30 Jun 2009 12:57:12 +0000 http://www.synthtopia.com/content/?p=15170#comment-138706 Well I reckon there might be space, or you could make some... Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them (see bottom of page at <a href="http://sites.google.com/site/skriyl/Home/midi-stylophone" target="_blank"><a href="http://sites.google.com/site/skriyl/Home/midi-sty...</a>)" target="_blank">http://sites.google.com/site/skriyl/Home/midi-sty...</a>)</a> Well I reckon there might be space, or you could make some… Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them (see bottom of page at http://sites.google.com/site/skriyl/Home/midi-sty...)

]]> By: hotchk155 http://www.synthtopia.com/content/2009/06/26/stylophone-as-midi-controller/#comment-138707 hotchk155 Tue, 30 Jun 2009 12:57:12 +0000 http://www.synthtopia.com/content/?p=15170#comment-138707 Well I reckon there might be space, or you could make some... Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them (see bottom of page at <a href="http://sites.google.com/site/skriyl/Home/midi-stylophone" target="_blank"><a href="http://sites.google.com/site/skriyl/Home/midi-sty...</a>)" target="_blank">http://sites.google.com/site/skriyl/Home/midi-sty...</a>)</a> Well I reckon there might be space, or you could make some… Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them (see bottom of page at http://sites.google.com/site/skriyl/Home/midi-sty...)

]]> By: hotchk155 http://www.synthtopia.com/content/2009/06/26/stylophone-as-midi-controller/#comment-138708 hotchk155 Tue, 30 Jun 2009 12:57:12 +0000 http://www.synthtopia.com/content/?p=15170#comment-138708 Well I reckon there might be space, or you could make some... Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them (see bottom of page at <a href="http://sites.google.com/site/skriyl/Home/midi-stylophone" target="_blank"><a href="http://sites.google.com/site/skriyl/Home/midi-sty...</a>)" target="_blank">http://sites.google.com/site/skriyl/Home/midi-sty...</a>)</a> Well I reckon there might be space, or you could make some… Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them (see bottom of page at http://sites.google.com/site/skriyl/Home/midi-sty...)

]]> By: hotchk155 http://www.synthtopia.com/content/2009/06/26/stylophone-as-midi-controller/#comment-138709 hotchk155 Tue, 30 Jun 2009 12:57:12 +0000 http://www.synthtopia.com/content/?p=15170#comment-138709 Well I reckon there might be space, or you could make some... Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them (see bottom of page at <a href="http://sites.google.com/site/skriyl/Home/midi-stylophone" target="_blank"><a href="http://sites.google.com/site/skriyl/Home/midi-sty...</a>)" target="_blank">http://sites.google.com/site/skriyl/Home/midi-sty...</a>)</a> Well I reckon there might be space, or you could make some… Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them (see bottom of page at http://sites.google.com/site/skriyl/Home/midi-sty...)

]]> By: hotchk155 http://www.synthtopia.com/content/2009/06/26/stylophone-as-midi-controller/#comment-138711 hotchk155 Tue, 30 Jun 2009 12:57:12 +0000 http://www.synthtopia.com/content/?p=15170#comment-138711 Well I reckon there might be space, or you could make some... Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them (see bottom of page at <a href="http://sites.google.com/site/skriyl/Home/midi-stylophone" target="_blank"><a href="http://sites.google.com/site/skriyl/Home/midi-sty...</a>)" target="_blank">http://sites.google.com/site/skriyl/Home/midi-sty...</a>)</a> Well I reckon there might be space, or you could make some… Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them (see bottom of page at http://sites.google.com/site/skriyl/Home/midi-sty...)

]]> By: hotchk155 http://www.synthtopia.com/content/2009/06/26/stylophone-as-midi-controller/#comment-138713 hotchk155 Tue, 30 Jun 2009 12:57:12 +0000 http://www.synthtopia.com/content/?p=15170#comment-138713 Well I reckon there might be space, or you could make some... Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them (see bottom of page at <a href="http://sites.google.com/site/skriyl/Home/midi-stylophone" target="_blank"><a href="http://sites.google.com/site/skriyl/Home/midi-sty...</a>)" target="_blank">http://sites.google.com/site/skriyl/Home/midi-sty...</a>)</a> Well I reckon there might be space, or you could make some… Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them (see bottom of page at http://sites.google.com/site/skriyl/Home/midi-sty...)

]]> By: hotchk155 http://www.synthtopia.com/content/2009/06/26/stylophone-as-midi-controller/#comment-138715 hotchk155 Tue, 30 Jun 2009 12:57:12 +0000 http://www.synthtopia.com/content/?p=15170#comment-138715 Well I reckon there might be space, or you could make some... Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them (see bottom of page at <a href="http://sites.google.com/site/skriyl/Home/midi-stylophone" target="_blank"><a href="http://sites.google.com/site/skriyl/Home/midi-sty...</a>)" target="_blank">http://sites.google.com/site/skriyl/Home/midi-sty...</a>)</a> Well I reckon there might be space, or you could make some… Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them (see bottom of page at http://sites.google.com/site/skriyl/Home/midi-sty...)

]]> By: hotchk155 http://www.synthtopia.com/content/2009/06/26/stylophone-as-midi-controller/#comment-138716 hotchk155 Tue, 30 Jun 2009 12:57:12 +0000 http://www.synthtopia.com/content/?p=15170#comment-138716 Well I reckon there might be space, or you could make some... Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them (see bottom of page at <a href="http://sites.google.com/site/skriyl/Home/midi-stylophone" target="_blank"><a href="http://sites.google.com/site/skriyl/Home/midi-sty...</a>)" target="_blank">http://sites.google.com/site/skriyl/Home/midi-sty...</a>)</a> Well I reckon there might be space, or you could make some… Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them (see bottom of page at http://sites.google.com/site/skriyl/Home/midi-sty...)

]]> By: hotchk155 http://www.synthtopia.com/content/2009/06/26/stylophone-as-midi-controller/#comment-138700 hotchk155 Tue, 30 Jun 2009 12:53:49 +0000 http://www.synthtopia.com/content/?p=15170#comment-138700 Well I reckon there might be space, or you could make some... Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them <a href="http://sites.google.com/site/skriyl/Home/midi-stylophone" target="_blank">http://sites.google.com/site/skriyl/Home/midi-sty...</a> Well I reckon there might be space, or you could make some… Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them http://sites.google.com/site/skriyl/Home/midi-sty...

]]> By: hotchk155 http://www.synthtopia.com/content/2009/06/26/stylophone-as-midi-controller/#comment-138701 hotchk155 Tue, 30 Jun 2009 12:53:49 +0000 http://www.synthtopia.com/content/?p=15170#comment-138701 Well I reckon there might be space, or you could make some... Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them <a href="http://sites.google.com/site/skriyl/Home/midi-stylophone" target="_blank">http://sites.google.com/site/skriyl/Home/midi-sty...</a> Well I reckon there might be space, or you could make some… Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them http://sites.google.com/site/skriyl/Home/midi-sty...

]]> By: hotchk155 http://www.synthtopia.com/content/2009/06/26/stylophone-as-midi-controller/#comment-138705 hotchk155 Tue, 30 Jun 2009 12:53:49 +0000 http://www.synthtopia.com/content/?p=15170#comment-138705 Well I reckon there might be space, or you could make some... Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them <a href="http://sites.google.com/site/skriyl/Home/midi-stylophone" target="_blank">http://sites.google.com/site/skriyl/Home/midi-sty...</a> Well I reckon there might be space, or you could make some… Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them http://sites.google.com/site/skriyl/Home/midi-sty...

]]> By: hotchk155 http://www.synthtopia.com/content/2009/06/26/stylophone-as-midi-controller/#comment-138710 hotchk155 Tue, 30 Jun 2009 12:53:49 +0000 http://www.synthtopia.com/content/?p=15170#comment-138710 Well I reckon there might be space, or you could make some... Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them <a href="http://sites.google.com/site/skriyl/Home/midi-stylophone" target="_blank">http://sites.google.com/site/skriyl/Home/midi-sty...</a> Well I reckon there might be space, or you could make some… Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them http://sites.google.com/site/skriyl/Home/midi-sty...

]]> By: hotchk155 http://www.synthtopia.com/content/2009/06/26/stylophone-as-midi-controller/#comment-138712 hotchk155 Tue, 30 Jun 2009 12:53:49 +0000 http://www.synthtopia.com/content/?p=15170#comment-138712 Well I reckon there might be space, or you could make some... Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them <a href="http://sites.google.com/site/skriyl/Home/midi-stylophone" target="_blank">http://sites.google.com/site/skriyl/Home/midi-sty...</a> Well I reckon there might be space, or you could make some… Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them http://sites.google.com/site/skriyl/Home/midi-sty...

]]> By: hotchk155 http://www.synthtopia.com/content/2009/06/26/stylophone-as-midi-controller/#comment-138714 hotchk155 Tue, 30 Jun 2009 12:53:49 +0000 http://www.synthtopia.com/content/?p=15170#comment-138714 Well I reckon there might be space, or you could make some... Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them <a href="http://sites.google.com/site/skriyl/Home/midi-stylophone" target="_blank">http://sites.google.com/site/skriyl/Home/midi-sty...</a> Well I reckon there might be space, or you could make some… Miduino can run off a PP3 so you could make a self contained controller. If you are prepared to rip the guts out of the stylophone (leaving the keypad and resistors) you could add other controls like pitchbend/mod knobs etc using the same microcontroller board to manage them http://sites.google.com/site/skriyl/Home/midi-sty...

]]> By: MirlitronOne http://www.synthtopia.com/content/2009/06/26/stylophone-as-midi-controller/#comment-138659 MirlitronOne Mon, 29 Jun 2009 18:37:06 +0000 http://www.synthtopia.com/content/?p=15170#comment-138659 Yep, the instructions do the business. Can you get the Miduino board in the box somehow? Nice hack! Yep, the instructions do the business. Can you get the Miduino board in the box somehow?

Nice hack!

]]> By: hotchk155 http://www.synthtopia.com/content/2009/06/26/stylophone-as-midi-controller/#comment-138647 hotchk155 Mon, 29 Jun 2009 15:08:13 +0000 http://www.synthtopia.com/content/?p=15170#comment-138647 :( well I only created the clip to illustrate a forum post on another site (kompoz)... never expected anyone to find it on youtube... then wondered where all the hits were coming from! I added the instructions at <a href="http://sites.google.com/site/skriyl/" target="_blank">http://sites.google.com/site/skriyl/</a> later on.. since I actually feel the same way as you about interesting clips with lack of any info! well I hope the instructions are helpful - all feedback welcome. cheers, jason :( well I only created the clip to illustrate a forum post on another site (kompoz)… never expected anyone to find it on youtube… then wondered where all the hits were coming from! I added the instructions at http://sites.google.com/site/skriyl/ later on.. since I actually feel the same way as you about interesting clips with lack of any info!
well I hope the instructions are helpful – all feedback welcome. cheers, jason

]]> By: hotchk155 http://www.synthtopia.com/content/2009/06/26/stylophone-as-midi-controller/#comment-138648 hotchk155 Mon, 29 Jun 2009 15:08:13 +0000 http://www.synthtopia.com/content/?p=15170#comment-138648 :( well I only created the clip to illustrate a forum post on another site (kompoz)... never expected anyone to find it on youtube... then wondered where all the hits were coming from! I added the instructions at <a href="http://sites.google.com/site/skriyl/" target="_blank">http://sites.google.com/site/skriyl/</a> later on.. since I actually feel the same way as you about interesting clips with lack of any info! well I hope the instructions are helpful - all feedback welcome. cheers, jason :( well I only created the clip to illustrate a forum post on another site (kompoz)… never expected anyone to find it on youtube… then wondered where all the hits were coming from! I added the instructions at http://sites.google.com/site/skriyl/ later on.. since I actually feel the same way as you about interesting clips with lack of any info!
well I hope the instructions are helpful – all feedback welcome. cheers, jason

]]>