The Eowave Koma Analogue Bassline Synthesizer With Sequencer

2012 NAMM Show: Boutique synth manufacturer Eowave will be introducing a new analog bassline synthesizer at the Winter NAMM Show, the KOMA synthesizer.

Eowave describes the KOMA synth as “a step back into the 80s with a touch of 2012”.

KOMA is an analog bass synthesizer, with sequencer, inspired by classic synths from the 1980s. It offers a synthesis section with 256 sound presets and 256 patterns and a step sequencer section.

The synthesis section offers the possibility to mix 4 different waveforms (saw, square, sub, noise) for infinite modulations. The SUB DESYNC mode enables to desynchronize and to detune the SUB and the main oscillator for complex sounds.

The filter is a 24 dB resonant low-pass filter. The LFO has 8 waveforms (triangle, ramp up, ramp down, square, random, digital noise, staircase up, staircase down) and can modulate the VCO, VCF or PWM.

The 16 step sequencer has 4 sections: 1 for the notes and 3 freely assignable to a parameter of your choice.

The Eowave KOMA is priced at 599 โ‚ฌ excl. VAT. Details below.

Here’s a demo of a KOMA synthesizer prototype in action:

Oscillator section

  • MAIN OSCILLATOR
    • Main VCO with 2 waveforms (square and saw), plus SUB (square) and NOISE
    • The pulsewidth of the square waveform can be modulated by env2 or by the LFO.
    • The main oscillator can be transposed up to 3 octaves
    • The main oscillator frequency can be modulated by the LFO or by env3
    • Glide
    • -Mix of the 4 waveforms
  • SUB
    • sub (sub can be 1 or 2 octaves below the master freq).
    • The DESYNC mode enables to desynchronize and detune the SUB from the main oscillator.
    • In the DESYNC mode, the SUB can be at the same frequency than the main oscillator or 1 octave below.

Filter section

  • 24dB resonant low-pass filter for a classical 80s sound
  • Variable cutoff and resonance
  • The filter can be modulated by ENV2, KB, LFO.
  • External audio with a trimmer to feed the filter

LFO section

  • The LFO has 8 waveforms (triangle, ramp up, ramp down, square, random, digital noise, staircase up, staircase down)
  • Variable speed
  • The LFO modulates the VCO, VCF or PWM
  • External MIDI clock synchronization

ENV1, ENV2 & ENV3

  • ENV1 & ENV2: these 2 envelopes ADSR modulate respectively the amplitude and the filter.
  • Attack goes from 2ms to 10 s.
  • ENV3: envelope Attack/Decay modulates the VCO

VCA section

  • Vca is affected to env1

MEMORY

  • 4 banks of 64 sound presets (SAV PRST, SAVE PAT)
  • 4 banks of 64 patterns
  • 256 sound presets
  • 256 patterns

Sequencer

  • 16 steps sequencer with 16 LED
  • 4 sections: 1 section for gate and note and 3 sections freely assignable to any parameter of the front panel.
  • Random feature
  • Adjustable tempo
  • You can transpose the sequencer via an external MIDI keyboard.
  • Each line can have a different number of steps to create complex modulations
  • Chain up to 8 sequences.
  • Shuffle feature
  • External MIDI clock synchronization

Connections

  • Audio in
  • Audio out
  • MIDI in
  • USB (for software update and MIDI in & out)
More information is available at the Eowave site.

6 thoughts on “The Eowave Koma Analogue Bassline Synthesizer With Sequencer

  1. So there’s going to be the Koma synthesizer by Eowave, and then the Kommander by Koma Elektronik. Rather confusing ๐Ÿ˜‰

  2. I am looking forward to Checking the Koma,

    Christoph after a good sleep you shouldn’t be too baffled by the machines!! Good luck with it!

  3. OMFG- best synth i’ve seen in ages on spec and looks. Must admit i’ve been waiting on this sort of thang for a while and finally someone has done a decent job. This is the revolution not evolution of the TB. Thank-you Eowave ๐Ÿ™‚

Leave a Reply

Your email address will not be published. Required fields are marked *