Corsynth Intros Voltage Controlled LFO For 5U Modular Synthesizers

Spanish module manufacturer Corsynth has introduced the C102 VC LFO – a voltage controlled low frequency oscillator with five waveforms available simultaneously.

With three frequency ranges ( L, M, H ) the VC LFO can oscillate from one cycle every 7 minutes up to 1KHz. The LFO can be used to produce really slow and subtle modulations to audio frequency modulation (FM sounds).

Another important feature is that the oscillation frequency can be voltage controlled using the FM input. You can modulate the frequency with an envelope, other LFO , sequencer etc. Using the FM input, it’s also possible to get extra waveforms like hyperbolic sine wave, hyperbolic cosine wave and more.. Just connect one of the VC-LFO outputs to its FM input and turn up the FM level potentiometer.

The C102 VC LFO also has a Sync / Reset input. Every time a trigger signal is detected, the LFO will restart the waveform to the beginning of its cycle.

C102 main features:

  • Three frequency ranges:
    • L : from 7 minutes to 1 Hz
    • M : from 0.1 Hz to 40 Hz
    • H : from 2.5 Hz to 1000 Hz
  • Five waveforms available simultaneously:
    • Sine
    • Triangle
    • Saw
    • Inverse Saw
    • Pulse ( with variable pulse width)
  • Sync/Reset input
  • Frequency Modulation input with attenuator
  • Pulse Width control

The Corsynth VC LFO is expected to be available in February and is available for pre-order now. See the site for details.

One thought on “Corsynth Intros Voltage Controlled LFO For 5U Modular Synthesizers

Leave a Reply