New Synth – The MFB Dominion-X Synthesizer

MFB has updated their site with details on the Dominion-X synthesizer.

The MFB Dominion-X combines analogue synthesis, programmability and modular patching.

Features:

  • Programmable Analogue Synthesizer
  • 3 VCOs with wave shaping and ring modulationDual-Sync and Dual-FM features
  • 6-fold multimode-filter including 3 low pass configurations with 12/18/24 dB
  • patch-section for external CV/Gate-control
  • Velocity routing matrix with 11 destinations
  • 3 LFOs with 2 LFOS offering one-shot-modes and reset

The MFB Dominion-X is priced at 780, Euro.

Audio demos and details below.

The MFB Dominion X offers three oscillators for maximum flexibility. Each waveform can be varied in symmetry. Besides altering the pulse width of a rectangle, you may also continuously turn a saw tooth into a triangle and a triangle into a sine.

All oscillators also offer ring modulation. In addition, VCO 2 and VCO 3 can be synced to VCO1.

Finally, VCO3 can modulate the frequency of VCO 1 and VCO 2. The analogue oscillator circuit is processor-controlled for stable tuning.

To complete the available sound sources, noise or an external audio input can be added to the VCOs in DOMINION X’s mixer section.

The filter offers six operation modes. Available are three low pass variations with 12, 18 and 24 dB/oct. slopes. Also available are high pass-, band pass and a notch filter with slopes of 12 dB/oct. respectively 6 dB/oct. Variable filter modulations are possible via an invertible envelope, keyboard tracking, LFO, VCO, different MIDI controllers as well as by the use o the CV-input.

The two ADSR-type envelops are internally routed to the VCF- and VCA-sections. In addition, envelope 1 can also modulate the VCO section. LFOs 1 and 2 offer six waveform shapes including sample & hold. They may be switched to one-shot-modes to emulation simple envelopes. A third sine-LFO works in combination with a keyboard’s modulation wheel and can dynamically address the VCO, VCF and VCA sections.

Modulations are assigned by the use of selector switches, located at the destinations. This allows easily setting and re-routing internal modulation paths – ideally for your live-performance.

To integrate external modulators, control- and audio sources, DOMINION X offers nine inputs. Therefore, oscillators, filter, VCA, CV/Gate and mixer can be easily combined with other analogue synthesizers such as MFB’s MEGAZWERG, analogue sequencers such as MFB’s URZWERG PRO or modular synthesizer systems.

An additional selector switch allows assignment of velocity for up to eleven modulation destinations.

The MFB Dominion X offers 128 programmable patches. To support sound programming without an attached keyboard, different demo sequences are available. To use The MFB Dominion X as a filter box for external audio sources, the VCA can be opened permanently. Finally, there is an insert available to integrate an effect or distortion unit into the signal path.

The MFB Dominion X has the following dimensions: 330 x 170 x 60 mm. An external power supply is included.

via matrixsynth, mfb

11 thoughts on “New Synth – The MFB Dominion-X Synthesizer

  1. My personal experience with MFB is that it’s low-quality and when it breaks you’re in for a very frustrating experience.

  2. Hmmm, there’s a lot of awesome, affordable analogue gear coming out right now. What to do with my tax returns? Not sure yet, but I think I’m going to have to go with the Tempest. I have serious gear lust for it. Or maybe a Minitaur or Minibrute….This MFB synth looks pretty awesome on paper, too bad there’s no way in hell I’ll be able to demo one in Denver. Kind of hard to make a purchase with confidence without being able to play with it first

      1. I’ve heard the SED multimode filter will be shipping in this synth in a couple months. For now it has the standard MFB multimode filter.

Leave a Reply to Goku Cancel reply

Your email address will not be published. Required fields are marked *