Sinevibes has introduced Singularity – a new type of delay effect for OS X.
It starts with a tempo-synchronised feedback delay line, capable of true stereo panning, and its tail is then sent into three effect units connected in series. Each of these processors includes a selection of different algorithms: from filters, phasers and choruses to digital- and analog-style distortion, frequency shifter and granulator.
In addition to all this, Singularity has four modulation generators for parameter animation – all of which lets you create extremely sophisticated, out-of-this-world delay and echo effects. Continue reading →
Plankton Electronics has released the Jellyfish V2 Modular – a PT2399 based delay in Eurorack format.
With 17HP it includes an input pot with saturation red led, a mix section, a LFO with an external output, Time, Fine and Feedback controls with infinite feedback, a sync input and many modulation possibilities.
IN: attenuator for the incoming signal. The associated red led will start to glow just a few mV before the signal is clipping inside the delay IC. Note that when extreme feedback is used the led will glow independently of the incoming signal.
WET & DRY: mix pots for the signals. WET control the amount of delay sent to the output while DRY sends the input signal directly to the out.
TIME & FINE: delay time pots. The main control of the module. Turn it to get delay times from 27 to 570 mseg. NOTE: When powering up the machine these controls can not be in it’s lower position or the IC will not work. Turn it up a little bit before.
FDBCK: feedback control. This is the amount of delayed signal that is send again inside the delay. It goes from 1 repetition to infinite.
RATE: The frequency of the LFO.
DEPTH: The amount of LFO signal that is sent to the time parameter of the delay. Very useful for create vibrato effects or other crazy deep sea sounds.
WAVE: choose between a square or triangle wave for the LFO.