NUSofting has announced Strings Dream Synthesizer, a software synthesizer designed to reproduce the sound of the most famous strings machines in synthesizer history – emulating the classic Eminent Solina as well as its sister keyboards from Elka, Crumar and even their Japanese cousins.

You can preview the sound of NUSofting’s Strings Dream Synthesizer below:

Strings Dream Synthesizer” will be released in May 2009 first as VST plugin and later as AU. Estimated price 89 USD.

Details below.

If you’ve used NUSofting Strings Dream Synthesizer, leave a comment with your thoughts!

About Strings Machines.

A remarkable number of musicians recognize the desirable sonic character of “string machines”.  String machines were unique to the Seventies and nearly every major manufacturer offered some variation on the theme.  ARP’s biggest selling instrument was in fact their Omni, an instrument that combined a string machine with a simple synthesizer.  Even Moog got in on the act with their Opus 3.

Just as the Rhodes piano and Hammond organs were intended as portable solutions to musicians who desired the sound of more cumbersome (and expensive) instruments, string machines were seen as the gigging musician’s alternative to the orchestra.  Or, at the very least, it was easier to carry around than a Mellotron!  Of course, the string machines didn’t sound like an orchestra, but had a character that today’s musicians find quite appealing on its own merits.

What makes a string machine?

This is a polyphonic electronic keyboard based on the top-octave divide-down technology as used in electronic organs to produce a fully polyphonic instrument from a single master oscillator.  This means that just a single oscillation is the primary cause of all frequencies of all notes played.  There are two main sonic characteristics of instruments that use divide-down technology:

1) The waveforms are all derived from a simple pulse (on, off states) using post filters
2) The relative phase of the waveforms for all generated pitch is locked, more later about why this is so valuable.

Ensemble and/or Chorus effects were perhaps the main contributing factor to the sound of these instruments.  Not just any old chorus, either.  Only a good old-fashioned analogue BBD-based chorus or ensemble will do.  “BBD” is short for “bucket brigade device”, a specific sort of analogue (not digital as we are used today) chip used to generate delay in audio: http://en.wikipedia.org/wiki/Bucket_Brigade_Device.

Between two and six BBDs were employed to create the thick, swirling ensemble effect.

The delay times of BBD components are modulated using from 2 to up to 6 oscillators at low rate (LFOs), with different waveforms and rate, depending on the Chorus design. (Modulation of delay times is a method to simulate an ensemble of instruments using audio processing)

http://www.dsprelated.com/dspbooks/pasp/Chorus_Effect.html

The BBD delay not only delays the audio signal but also modifies the audio spectrum in a remarkable way, further adding to the signature sound of the strings machines.

Let’s return to the subject of “locked phase” aspect of top-octave divide-down technology.  The phase, “roughly speaking”, tells us when the waveform of the sound is going through its positive or negative cycle.  When the relative phases of two simultaneous sounds are not locked, you will hear variations in amplitude and timbre. This is especially obvious with electronically generated timbres.

Thus the inventors who aimed at the portable synthesized reproduction of a strings ensemble combined “locked phase” sound generation with a Chorus based on BBD chips.  As luck would have it, this clever design results in a stable timbre, providing not only in a good emulation of the acoustic strings ensemble, but also a singularly hypnotic sound suitable to the psychedelic musicians, then and now.

The amplitude modulation issue, aka the Paraphonic voicing.

Organs using the top-octave divide-down technology are fully polyphonic.  Each note is turned off and on using a simple gate on key down, so that the sound amplitudes change almost abruptly from zero to full volume and vice-versa when the key is released.  Manufacturers sought to compensate for this with expression or volume pedals designed to articulate the sound with fade ins and fade outs, rising or lowering the volume.

String machines however, draw upon the same sort of simple Attack/Decay style envelopes familiar to synthesizer players.  However, this presents a new problem.  In order to achieve full polyphony, there would need to be an envelope generator for each and every note of the keyboard.  A very costly (and cumbersome) solution!
Manufacturers found another answer in “paraphonic voicing”.  It works about like this: the first key played triggers the envelope, which increases the volume as set by the Attack parameter.  So long as the first key is held, any other other note will start at the currently-held volume level.  Since there is only one actual envelope generator, the envelope itself is not re-triggered.

What happens when the key is released depends on the particular manufacturer’s implementation. Usually the first release key starts the fade out of the sound and following keys are slaved to that first key’s volume.

In any event, the Paraphonic voicing has some little something to do with the familiar string machine sound, though many string machine manufacturers approached their envelope behaviour in different ways

The Paraphonic label is also applied to other synthesizer keyboards which have a polyphonic oscillator bank followed by a monophonic section with envelopes and filters.  The classic Polymoog is one such instrument, and so is the Korg Poly-800, which had eight voices, but only a single filter.

Other Features and a little history

Not all strings machine feature Vibrato and De-tuning of coupled oscillators.

Ken Freeman was the inventor of an early strings machine.  His machine’s ensemble effect is not based on a BBD Chorus.  Instead, multiple de-tuned oscillators are triggered with each note. See the great article by Gordon Reid at

http://www.soundonsound.com/sos/feb07/articles/freemanstring.htm

Like Freeman’s String Symphonizer, the Yamaha SS30 had twin oscillator banks that could be de-tuned against one another.

The vibrato in organs and strings machines (which are organs plus envelope and chorus) is created by modulating the pitch of the master oscillator.  This can add more (soemtimes too much!) movement to the strings sound, but it can’t replace the chorus effect. The sort of vibrato is mostly useful for solo lines.

The first big chorus effect made using BBD components was the one designed by Eminent in Holland for their home console Eminent 310 Unique.  A simplified version of this became the Ensemble effect of the famous the Eminent Solina.  The Solina, in turn, was re-badged by ARP as the String Ensemble.  Read more about that at

http://www.soundonsound.com/sos/may07/articles/eminent310.htm

ARP made it’s own version of the chorus effect by essentially adding an LFO to the Eminent design

Italy was the home of many strings machines, most notably the Crumar, Elka and Logan ones.  The Elka Rhapsody was extensively used by Tangerine Dream both in the studio and on stage.  These keyboards have a very different sound the Solina.  It’s sound is somewhat harsher and thinner than that of the Eminent, but can be rich, like the Logan String Melody and some Crumar keyboards, though the latter tends to be more aggressive.

Crumar, Elka and Logan keyboards were sold in Germany and USA with different brand names.

Japanese manufacturers offered their own take on the string machine, including those made by Roland, with their now-classic chorus effect in tow.  The advances in these designs would elevate the quality of the string synthesizer to a whole new level.  Read more about that at:

http://www.soundonsound.com/sos/Jul02/articles/retrozone0702.asp

String machines were solid contenders for over a decade, even lasting well into the era of fully polyphonic synthesizers.  It was only when sampling hit the scene that these dear old machines would finally be laid to rest.

Today we can still appreciate the first simple analogue strings machines for their unusual and evocative tones.

Strings Dream is able to reproduce the infinite array of rich, analog pads from the most famous string machines in synthesizer history. Emulate the classic Eminent  Solina as well as its sister keyboards from Elka, Crumar and even their Japanese cousins.

String Dream does not use samples.  Instead the “octave divider” circuity typical of those early polyphonic synths has been natively emulated, so that all sounds are computed in realtime in true VA fashion.

The fundamental “Ensemble” effect (like the vintage Solina chorus) accurately follows the architecture of its hardware counterpart.  However, it has been extended for a wider range of “chorus” effects.

String Dream is easy to use.  It’s layout and features take their cue from and expand upon the familiar Solina design, with only the necessary controls to achieve the textures of the other strings machines.

We’ve provided a full ADSR envelope generator and Waveform selection (for several strings and organs sounds),.

There is a volume fader and switch for each of 6 stops (C.Bass, Cello, Brass, Horn, Viola, Violin).  The fader for each stop allows an almost infinite number of mixtures.

A powerful parameter to tune the relative phase of Violin wave against the other voices.

Brightness and highpass filters are also adjustable.

More performance flexibility with MIDI velocity and polyphonic mode selectable.

Note also that the C.Bass and Cello are monophonic with full legato mode and you can select one of eight keyboard split points, allowing you to layer the mono voices with the others.

Beside the chorus “Ensemble” effect, Strings Dream offers a four-stage Phaser for those famous “Jarre pads” and an exclusive reverb with the ability to morph on request to that “trembling” sound of the vintage spring reverb units.

“Strings Dream Synthesizer” will be released in May 2009 first as VST plugin and later as AU.  Estimated price $89 USD.

Tweaking The Parameters of SDS.

The 6 stops (C.Bass, Cello, Brass, Horn, Viola, Violin) are modeled after console organs or the big accordions, and should be conceived of in the same way.

C.Bass and Cello are the bass instruments, monophonic in SDS VSTi.  Cello has the standard tuning, also called  8′ in organs, while C.Bass is one octave lower (16′ voice). Their waveforms are fixed and the filters of these voices enhance the low tones.

Brass, Horn and Viola are 8′ voices in the standard tuning. The names suggest the kind of filters applied to these stops, therefore Brass is bright and shrill,  Horn is a much darker tone, and Viola is more open and even.  Using an accurate mixture of these three stops you can emulate a huge array of string machine oscs tones, and many variations besides.

Violin is a 4′ voice, which that means that it is one octave above the Brass, Horn and Viola. Note that for this stop a Phase knob is available, providing a significant harmonic change when the Violin is layered with another stop.

Note also that C.Bass and Cello are played only by the keys below the split point (the note set by the “Split Lower at XX” menu), while the other can be played over the entire range.

Another  remarkable feature is the ability to choose from three different waveforms for the set Brass, Horn and Viola, Violin.  You get two “sawtooth” waveforms and a “vintage” square. The latter allows for more evocative psychedelic effects.

The spectrum of the oscillators sound can be further shaped by the Brightness and HPF controls. Brightness boosts the high frequencies and HPF controls the main highpass filter.  Raising the value of this parameter reduces the low frequencies.  This is very useful when emulating the lighter texture of a viola or violin ensemble.

The Amp Envelope.

This is a full four-stage ADSR envelope (attack time, decay time, sustain level, release time).  The vintage hardware string machines usually featured only attack and release times in order to fade the sound in and out, but we’ve given you a little more control.

The ADSR mode switch allows to simulate the so called “paraphonic” mode used in the first hardware string machines.  When the switch is up, the ADSR is fully polyphonic and plays like a more conventional synthesizer envelope.

The MIDI velocity sensitivity is also something which obviously didn’t exist in that funky old gear, but SDS allows it as an option.

The Effects.

The three SDS effects are self-explanatory. Experiment with their knobs and have fun!

NUSofting has released Modelonia Physical Modeling Synth v1.7.0.6.

Modelonia is a physical-modeling synthesizer that uses a hybrid of two distinct model ‘types’-

a plucked-string model, and a blown-bore (ie trumpet-type) model. Each model may be used simultaneously, and the signal path allows cross-modulation between the two models for more interesting and complex tones.

Preview the sound of Modelonia below:

More demos are available at the NUSofting site.

Whats new:

• The 128 presets by Xenos explore new synthetic textures thanks to the Modelonia hybrid modeling
• Further engine optimization and stabilization
• Graphics updated
• Mac version for PPC and intel machines,

Nusofting has released Broken Drum Machine for Mac OS X.

BDM is a plugin instrument designed for musicians who love chaos. BDM offers four drum pads in the style of an old beat box — one each for Bass Drum, Snare, Hi-Hat and Stick. Each pad features the usual suspects for shaping the synthesized sound, including tone, decay, pitch, pan and gain.

On top of the standard controls comes the broken factor — each pad features its own sliders for chaos and chance. Chaos sets the amount of variations to the original sound, and chance is the probability algorithm for the chaos to occur.

By varying and automating the chaos and chance sliders, you can achieve an infinite range of wild and unpredictable sounds, similar to creating glitches and bleeps by manipulating an analog circuit.

Features:

• Addictive ever changing sound.
• Blend of acoustic and electronic sound, PCM + VCO generation.
• Seven “Chaos” Modulations of various parameters.
• Controllable random crackles generation. 4 Mono + 1 Stereo out.
• MIDI Learn for each parameter.
• Customizable default PCM sound bank and skin using the Modpacks.
• BDM is sold with one extra Modpack.
• The extra Modpack is included in downloadable demo too.

BDM is now available for Windows and Mac OS X Universal Binary in VST and AU formats for €35.90 / $51.90.

NuSofting has introduced Broken Drum Machine, a VST inspired by a combination of several old school beat boxes and the circuit-bending culture around the “toy” Casio and Yamaha keyboards of the 80s.

BDM is a plugin instrument designed for the musicians who love chaos and usually find the unpredictable behaviour of an uncontrollable sound machine stimulating and inspiring.BDM offers four drum pads in the style of an old beat box- one each for Bass Drum, Snare, Hi-Hat and Stick.

Each pad features the usual suspects for shaping the synthesized sound, including tone, decay, pitch, pan and gain. On top of the standard controls comes the broken factor – each pad features its own sliders for chaos and chance. Chaos sets the amount of variations to the original sound, and chance is the probability algorithm for the chaos to occur. By varying and automating the chaos and chance sliders, you can achieve a infinite range of wild and unpredictable sounds, similar to creating glitches and bleeps by manipulating an analog circuit.

Features:

• Addictive ever changing sound
• Blend of acoustic and electronic sound, PCM + VCO generation
• Seven “Chaos” Modulations of various parameters
• Controllable random crackles generation.
• 4 Mono + 1 Stereo out
• MIDI Learn for each parameter
• Customizable default PCM sound bank and skin using the Modpacks

BDM is available for the PC/VST for$44.90.

NUSofting has introduced Acidome VST synthesizer for Windows PCs, a synth designed to bring you an optimized set of useful features and a rich, juicy sound.

Acidome Features:

• Osc 1, the “variosc”: With this sound generator you can draw a waveform with the mouse, or load one of the many shapes available in the included Acidome Waveform Library. If it looks boring, edit it directly. You can modify a waveform in realtime — while you’re playing — and hear the sound morphing. Acidome includes the WaveTable Picker, a tool for you to convert standard WAV files into templates for the Acidome OSC 1.
• Osc 2, the “multiosc” This sound generator is made from 4 “non band limited” oscillators with ramp waveform. You can adjust the amount of detune beetwen them with the “Unispread” control for an immediate ‘phat’, raw and dirty classic sound.
• Filter Stage: Acidome has plenty of filtration built right in.With a LowPass, HighPass, BandPass, BandReject, Peak filter and an extra LowPass smoother than the first one.The filter frequency can be modulated by the 16-step LFO which is BPM syncable for rhythmic effects,but it can also be smoothed for luscious ambient sweeps.
• Effects Acidome has cool effects: Ping-Pong Delay, a Stereo Chorus, and a 16-step Gate Sequencer to drive groovy pads. All with BPM sync.
• Pitch Envelope
• Limiter
• 300+ Presets

Marimka is a virtual instrument that is targeted to ethnic folk sounds, in this case marimba and balafon. Marimka is also capable of other percussive sounds like frame drums.

Marimka is not merely an acoustic emulation, at extreme settings it reveals a strong synthetic timbre, so it’s also very nice for hybrid textures. Despite the few controls you see on the GUI, the range of different percussive sounds is huge.

Marimka is shareware; version 1.0 is freely downloadable as a trial, but for regular use a license is necessary, available for $19 USD. Moreover, the license purchase will also allow the users to receive free updates and support for the Marimka VSTi.

Marimka Controls:

• EG attack: from hard to soft mallet
• EG decay: note duration
• EG tune: pitch sweep
• FM tone: to add harmonics
• Pitch Fine: fine tuning
• Pitch Octave: octave transpose
• Volume: output level
• Bypass Limiter: to turn on/off the internal limiter
• Resonators Plate amount: to adjust resonance decay
• Resonators Gain: the audio level of the Resonators
• Resonators Width: the pitch of the Resonators
• Ping-Pong Delay: stereo delay effect synced to VST host BPM

More information is available at the NUSofting site.

Capable of delivering aggressive and expressive sound for solos and riffs, microrock was created specifically for use in bass, lead and powerchord lines. However microrock does not specifically attempt to emulate the guitar, and firmly remains a synthesizer, with a character all of its own. Its architecture, internal filters and expressive modulation capabilities mean that it is capable of producing a very wide variety of original and imitative timbres, including even vocal and brass instruments sounds.

Features:

• A monophonic synthesizer architecture suited to bass and lead sounds
• Two physically modelled oscillators which work as a pair
• NUSofting’s DynaTone filter control, with Tonerama color mix
• Overdrive and Distortion effect units (with automatic ‘feedback’ generation)
• Wah effect unit
• Stereo Chorus unit
• Vibrato unit
• Delay unit, with sync, HP-LP filter and modulation.

microrock comes with 102 presets on board, and is priced at Euro 36.90. A special “sidegrade” price is available for registered users of “the Abstract Guitar” by Dash Signature, “sidegrade” price is only Euro 19.90. A demo version is available for download.

For more information, visit their web site at nusofting.liqihsynth.com.