Yonac Software Intros Trooper Synthesizer For iOS – ‘A Total Synth Explosion’

Yonac Software has introduced Trooper, a new software synthesizer for iOS that they describe as ‘”a total synth explosion”.

“Get ready for an all-out sonic assault,” they say, “because Trooper is here and it’s our meanest, beastliest, user-friendliest synth yet!”

Here’s what they have to say about Trooper:

“Many of Trooper’s parameters are meant to interact and meld together in novel ways. For example, the oscillator volumes —beyond just acting as mere blend knobs— vary the characteristics of the basic signal depending on how far they are “pushed”. The emphasis is on providing warm and round basic tones with lots of variable harmonic content.

The primary oscillators are backed by an audible LFO that is both a sound source and a wide frequency range modulator. This lets FM-based sounds to combine with traditional waveforms. A pink/white noise generator helps out pads and percussions, and insidiously changes tonality when added in small amounts.

A new filter implementation complements the pugnacity of the signal generators. In its middish settings, the resonance can be characterized as “throaty.” The filter is capable of self-oscillating, and can be controlled via the keyboard. The mated ADSR envelope is shaped to provide tonal ‘immediacy’ and smooth frequency shifts. The amount knob has a wide range that changes the feel and shape of the envelope, especially when pushed above the mid-level.

The output stage features a virtual VCA that imparts tones colloquially termed as “fat”. Extra modulation is provided by a non-audible LFO and a dedicated envelope. The LFO offers numerous wave shapes, BPM syncing, and key tracking. Its output is controllable via the mod wheel, velocity, or aftertouch.

The Esprit parameter helps deploy some of the Trooper “special sauce.” Highly interactive with the stages preceding it, Esprit is known to be handy in tightening up bass tones, and in adding the “je nais se quois” to presets at large. The Get6 parameter is a one-touch ticket to big, mix-filling synth sounds. So whenever you’re lost in an empty mix…it’s got your six.

The arpeggiator inspires rhythms with five algorithms, variable note value, octave range, and gate. The “Texturizer” purveys a wide range of modulation effects that include chorus, flanging, variable comb, resonant delay, and stereo imaging. The BPM-syncable two-tap delay has time and feedback controls per channel, and is tuned a little darker than our usual offerings. Trooper can run in monophonic or polyphonic mode, the latter providing up to 12 voices. Legato is available in either mode.”

Other features include a robust MIDI implementation with MPE support, and the synth is able to I/O MIDI performance data. The “MagTouch” virtual controller lets you to play and record (in AUv3 hosts so enabled) over the MPE protocol. MIDI learn is made easy via a visual interface, and users can save, patch-link, and share MIDI CC maps. Bluetooth MIDI input is also supported.

The AUv3 implementation lets you to run multiple instances of Trooper in DAWs. Trooper’s fluid UI accommodates a wide variety of screen sizes and view configurations. Feature navigation is designed to be nonintrusive so that parameters can be accessed easily. The iPad implementation supports portrait layout, so that pretty much all is on one screen.

The standalone app also provides a “Tapedeck” to record, save, and share your ideas on the quick. It features a built-in looper, and a metronome with configurable time signature. The standalone also features tap tempo, and MIDI clock syncing. DSP is in high resolution 64-bit, with native processing at up to 96kHz.

Pricing and Availability

Trooper is available now, with an intro price of $6.99 USD.

17 thoughts on “Yonac Software Intros Trooper Synthesizer For iOS – ‘A Total Synth Explosion’

  1. Good sounding synth, very “meaty” analogue sounds.

    However I was disappointed that velocity sensitivity was not activated for the presets.

    I discovered there was a configuration screen for this, but it’s not enabled by default. You can route velocity to the amplifier and cut-off frequency, but not to the filter envelope for example.

    Let me know if there’s a better way of doing this!

  2. Jokes aside, but why most developers of iOS apps don’t support M1/M2 macs?!
    Moog does it 🙂
    Same cpu architecture, same cpu on iPads Pro as on Mac M based computers, so what gives?!
    Short answer is that devs are blocking their apps, but why?!

    1. While that’s a good guess, the real answer is Moog actually writes separate code for their Mac versions. They’re not using the built in Apple Silicon support.

      Apple’s “turn-key” support is not ready. Most devs (including Moog) don’t want to subject users to the crash fest. Moog has an engineering team of full time devs and can write code for multiple platforms. While most iOS apps are solo endeavors

Leave a Reply to Bill Cancel reply

Your email address will not be published. Required fields are marked *